Login to your account

Username
Password *
Remember Me

Create an account

Fields marked with an asterisk (*) are required.
Name
Username
Password *
Verify password *
Email *
Verify email *

R Dan and Co Inc

Rebuilt

R. Dan and Co., Inc. prides itself on its reputation for supplying the highest standard of rebuilt paper machinery.  We are able to supply machines in ‘as is’ ‘good running order, ‘reconditioned’ or ‘fully rebuilt condition’, according to your needs.
Our engineering and manufacturing are experienced with major brands of pulp and paper machinery, which allows us to supply almost any machine required in pulp and paper processing.

For slushing of raw materials such as waste paper or virgin pulp.
• Model and Size: “Black Clawson” Size 2
• Serial No.: P-81-3428-S
• Stock consistency: 3 – 15%
• Tub Diameter: 600mm
• Tub Height: 620mm
• Tub material: Stainless Steel
• Rotor diameter: 240mm
• Rotor material: Stainless Steel
• Installed Motor: 7.5 hp, 1745 rpm, 230/460 volts, 3 ph, 60 Hz, Flanged mounted

 

Use in stock preparation and broke screening.

Operating Specifics:
• Stock Consistency %: normal approx.3 / max. 3.5
• Motor Rating: 50 hp
• Rotor Speed: 715 rpm
• Power requirement: 30 kW approx.
• Motor Power: 37 kW
• Max. operating pressure: 6 bar
• Min. discharge pressure: 1.2 bar
• Pressure drop: up to 0.3 approx.
• Mfg. No.: SS-5291
• Mfg. Date: 2003

 

Use in stock preparation and broke screening.
Operating Specifics:
• Stock Consistency %: normal approx.3 / max. 3.5
• Motor Rating: 150 hp
• Rotor Speed: 440 rpm
• Power requirement: 85 kW approx.
• Motor Power: 110 kW
• Max. operating pressure: 3.5 bar
• Min. discharge pressure: 1.2 bar
• Pressure drop: up to 0.3 approx.
• Sealing water volume flow rate: 5 l/min (fresh water)
• Sealing water pressure: 1 bar (above max. stock pressure)
• Mfg. No.: SS-5289
• Mfg. Date: 2003

 

Operating Specifics:
• Stock Consistency %: normal approx.3 / max. 3.5
• Motor Rating: 100 hp
• Rotor Speed: 440 rpm
• Power requirement: 70 kW approx.
• Motor Power: 75 kW
• Max. operating pressure: 4 bar
• Min.. discharge pressure: 1.2 bar
• Pressure drop: up to 0.3 approx.
• Mfg. No.: SS-5290
• Mfg. Date: 2003

For the screening of unusable materials after pulping and high density cleaning.

Operating Specifics:
•Capacity: 190 tons/day
•Inlet consistency: 2.5 – 3.5%
•Date manufactured: 1999
•Rotor diameter: 950mm
•Screen perforation: 2.6mm holes(existing)
•Container volume: 1.8m³
•Number of blades: 8
•Drive: V-belt driven – 8 belts, belt section type SPC

 

Specifications:
•Material: Cr-Ni Steel
•Overall Screen length: 1500mm
•Feed stock consistency: 2 – 3%
•Accepts consistancy: 2 - 3 %
•Reject consistency: 10 – 30 %
•Rated motor power: 55 kw
•Rated speed: for hole 1660rpm
                      for slot: 1860rpm
•Rotor clearance: 2 mm
To remove contaminants in the pulp suspension. For hole or slot screening.
Operating Specifics:
• Type and size: “Bird” M-100
• Mass through flow: Up to 25 tpd
• Inlet consistency: 0.8 - 1.0% (slot), 2.5 -3.0% (hole)
• Screen hole or slot size: As required
• Screen basket: Hole or Slotted with profile
• Rotor type: Bump Rotor
• Motor power: 30 kw
• Screen surface area: 0.48 M²
• Screen basket dimension: I.D. 305 mm, Height 496 mm
• Drive: V-belt driven with motor and machine pulleys

 

 

To remove flat shaped contaminants in the pulp suspension. For hole screening.
Operating Specifics:
• Type and size: Omnisorter OS8-LR
• Accept mass throughflow: Up to 600 TPD
• Stock consistency: 3.0 %
• Screen hole size: As required
• Screen basket: hole screen with profile
• Screening surface: 2.16 M²
• Basket dimension: 813 mm I.D. x 846 mm Height x 5 mm thick
• Rotor type: Lobed Rotor
• Rotor speed: 582 rpm
• Motor power: 110 kW
• Drive: V-belt driven with motor and machine pulleys

 

 

For the removal of ash and fines in filtrates.
Operating Specifics:
• Serial Number: 90-DNT-200-0129
• Feed stock consistency: 0.5 - 1.5%
• Web stock consistency: 6 - 11%
• Working width: 1830mm
• Wire width: 1911mm
• Wire Speed: 488 - 915 Meters / min.
• Rated Power: 55 Kw Main drive, 7.5 Kw Conveyor drive
• Machine Dimensions: 3175 mm x 3480 mm x 1840 mm
• Machine weight: Approx. 8 tons
Features:
• As new (fully rebuilt)
• New recovered grooved roll
• New bearings
• New doctors

 

 

 

Used to handle paper mill sludge about 20 tons/day bone dry.
Specifications
Model: Klein, Germany
Capacity: 15 – 20 TPD
W.width mm 2000 Type BS 20 Ing. conc. % 2,5 Outg. conc % 35
dry. Outlet cons. 35 % Galvanised frame work inlet min 2.5 %
Excluding
Drive, and motor.

 

To remove flat shaped contaminants in the pulp suspension. For coarse screening.
Operating Specifics:
• Model: “Kobayashi”
• Mass throughput: Up to 99 TPD
• Feed stock consistency: 2.5 – 3.0 %
• Hole size: As required
• Screen Cylinder Dimension: Inside diameter 443 mm, height 500 mm
• Total screen area: 0.696 sq.m.
• Rotor type: Step Rotor
• Rotor speed: 920 rpm
• Motor rated power: 37 kw
• Operating pressure: 2.5 bar
• Drive: V-belt driven with motor and machine pulleys

 

 

To remove cubic shaped contaminants in the pulp suspension. For slot screening.
Operating Specifics:
• Model and Size: “Black Clawson” PS-36
• Mass throughflow: Up to 220 TPD
• Feed stock consistency: 1.0–1.5 %
• Screen dimension: I.D. 909. x 1086mm x 10mm
• Slot width: As required
• Total screen area: 3.10 sq.m
• Rotor type: Foil Rotor
• Rotor speed: 274 rpm
• Motor rated power: 90 kw
• Operating pressure: 2.5 bar
• Pressure drop: 0.3 bar
• Drive: V-belt driven with motor and machine pulleys

 

 

 

 

 

 

 

 

 

 

For uniform fiber treatment of long fiber furnish to improve its freeness.
Operating Specifics:
• Make: Sunds Jyla Conflo Refiner JC-01
• Model and size: JC-01, TAD 105950
• Manufacture No: 512501-1
• Manufacture Year: 1991
• Capacity range: 15 – 250 tpd
• Stock consistency: 2 – 4 %
• Inlet pressure: 1 – 2 bar
• Speed: 530 – 1200 rpm
• Motor power: 132 – 315 Kw
Features:
• Basic Machine
• Set of refining fillings
• Machine pulley
• Coupling
• Coupling guard

 

 

 

To remove flat shaped contaminants in the pulp suspension. For hole screening.
Operating Specifics:
• Model and Size: "Black clawson" PV-12 (reconditioned)
• Mass flow rate: Up to 165 tons/day
• Feed stock consistency: 2.5 - 3.0 %
• Hole size: As required
• Total screen area: 1.19 sq. m.
• Screen dimension:Inside diameter: 600 mm, Height: 632 mm
• Rotor type: 4 blade rotor (Original Black Clawson), Outside diameter: 595 mm, Height: 585 mm
• Rotor speed: 727 rpm
• Motor speed: 110 Kw
• Operating pressure: 2.0 bar




To remove contaminants in the pulp suspension. For slot screening.
Operating Specifics:
• Acceptance though flow: Up to 75 TPD
• Feed stock consistency: 1.0 - 1.5 %
• Slot width: As reqluired
• Screen dimentsion: Inside Diameter 603, Height 632
• Total screen area: 1.20 m2
• Rotor type: Multi Foil rotor
• Motor rated power: 30 Kw
• Operating pressure 2.5 bar
• Outlet pressure: 1.2 bar
• Pressure drop: 0.3 bar
Features:
• Casing with inlet, Outlet and reject branches
• Lightweight contaminant

 

 

 

 

 

 

 

 

 

 

 

For the removal of high density contaminants in secondary fiber suspension.
Operating Specifics:
• Capacity: 96 TPD
• Feed volume flow rate: 1900 mm
• Inlet consistency: 3.5 %
• Inlet pressure: 1.1 bar
• Accept pressure: 0.7 bar
Features:
• As new (reconditioned)
• Mainbody in cast iron lined with SS316 plate
• Flanges on inlet and accept in mild steel hot dipped galvanized
• Sight glass
• Junk trap in SS304
Excluding:
• Pressure gauges
• Mounting support
• Anchor bolts

 




For Screening of pulp suspension to remove impurities.
Operating Specifics:
• Capacity: Up to 75 (slot) / 165 (hole)
• Foundation Size: 1195 mm x 2142 mm
• Machine height: 1690 mm
• Installed power: 90 Kw max.
• Rotor type: As required
• Diameter: 495.3 mm
• Screen size: 506 mm dia. x 695 mm heigth x 5mm thick
• Screen hole size: As required
• Screen area: 1.2 m2
• Inlet consistency: 3 %
• Weight: 1450 kgs.
Features:
• Choice of Slot or Hole screens
• Choice of Bump or Step rotor

 

To remove cubic shaped contaminants in the pulp suspension for slot screening.
Operating Specifics:
• Mass throughflow: up to 25 TPD
• Inlet: 2000 LPM
• Feed stock consistency: 0.9%
• Slot width: As required
• Screen dimension: Inside diameter 584.2 mm, Height 267 mm
• Total screen area: 0.49 sq. m.
• Rotor type: Foil Rotor
• Rotor speed: 720 rpm
• Motor rated power: 22 Kw
• Operating pressure: 2.5 bar
• Pressure drop: 0.3 bar
Features:
• Casing with inlet
• Outlet and reject branches
• lightweight contaminant outlet
• Rotor bearing assembly with steel shaft
• Rolling bearings and integrated supply lines
• 2 Pressure gauges (0 – 6 bars)
• Shaft sealing with packing gland
• Multi foil rotor and 0.25 mm slot basket in SS 316 L
• V-belts and machine pulleys
• Motor bracket with slide rails and Tensioning device
• Foundation fasteners

 

For the removal of plastics, styropor & other coarse contaminants and also for fiber recovery in white water system.
Operating Specifics:
• Type and size: 72” Hycor Hydroscreen Gravity SCreen
• Nominal flow capacity: 57 lps (900 gpm)
• Screen slot width: 0.5 mm (0.02”)
• Basic dimension (LxWxH): 1937 mm x 1816 mm x 2045 mm
• Inlet pipe outside diameter: 273 mm (10.75”)
• Outlet pipe outside diameter: 356 mm (14”)
• Bottom outlet dimension: 356 mm x 1750 mm approx.
• Shipping weight: 545.5 kgs (1200 lbs)
• Hydraulic flow capacity is based on clean water flow. Actual capacity for each specific application will vary based on type of solids to be screened, maximum solids concentration, and maximum and minimum flow rates.

 

As tail screen to remove unusable materials and to recover fiber.
Operating Specifics:
• Capacity: 30 TPD
• Overall Screen Length: 1500 mm
• Feed stock consistency: 2.5 %
• Accepsts consistency: 2.0 %
• Reject consistency: 10 - 15 %
• Rated Motor power: 75 kW
• Rated speed: 1660 rpm
• Rotor clearance 0.5 - 1.5mm
Features:
• Casing: Parts in contact with stock 304
• Screen plate halves: SS316
• Rotor shaft: STeel with SS cladding
• Shower nozzle: SS316
• Guide vanes: SS304
• Distributor blad

 

 

 

Operating Specifics:
• Capacity: 270 BDT/day at freeness of 250 - 300 CSF
• Inlet consistency: 7 - 10%
• Outlet consistency: 26 - 30%
Features:
The wire press consists of the following assemblies:
• The framing
• The stock inlet box
• Wire rolls
• Wire tensioning device
• Wire guide device
• Cleaning shower
• Take-off doctor
• Control circuit (control system)

 

 

"Beloit" Screw Press (Rebuilt)

For Thickening stock or sludge, 60 tpd for stock and 20 tpd for sludge.

Operating Specifics:
• Capacity: 80 tons/day @ Freeness of 400 CSF
• Inlet consistency: 4 - 8%
• Outlet consistency: 30%

Overall Dimensions:
• Length: 5055mm
• Width: 1395mm
• Height: 1265mm

 

Condition: Excellent
• Rebuilt with new bearings
• New cover
• New screen plate
• New tapered head screws
• New seals

 

Including:
• Cycloid Reducer
• Drive Motor (55kWx6Px3phx50Hz)
• Flexible Flanged Coupling
• Inlet Hopper
• Outlet Hopper
• Base Frame
• Flat form & Ladder
• Completed Screw Press centering and grinding

 

Price: USD 70,000

Basis: FOB Pusan, South Korea

 

Operating Specifics:
• Capacity: 85 TPD
• Inlet consistency: 4 - 6 %
• Oulet consistency: 28 - 32%
Operation:
From a stock inlet box the fibre suspension (4 – 6 % consistency) flows between two endless wires (top and bottom wires) which run over the bronze perforated and grooved dewatering cylinder. The majority of the water passes through these wires, first by gravity, then by surface pressure, whilst the fibrous stock is building up a filtering layer which greatly retains fines and fibres. The first press roll is against the dewatering cylinder. Subsequently, the fibre web is let onto the wires through the second press composed of two press rolls.
Finally, the concentrated fibrous stock (approx. 28 - 32 % consistency) is taken off the machine as endless web. The water is collected under the machine (wire press pit) and will be fed to the system. The endless web needs a break up screw conveyor (excluded) to break up the web and convey it to the next equipment.

 

Follow us

      

We have 31 guests and no members online

20 Alfonso St., Rosario,
Pasig City 1609 Philippines
TEL. +63.2.656.2298-99
FAX. +63.2.656.2089/ +63.2.470.7890
This email address is being protected from spambots. You need JavaScript enabled to view it.